National Technical Reports Library

The National Technical Information Service acquires, indexes, abstracts, and archives the largest collection of U.S. government-sponsored technical reports in existence. The NTRL offers online, free and open access to these authenticated government technical reports. Technical reports and documents in its repository may be available online for free either from the issuing federal agency, the U.S. Government Publishing Office’s Federal Digital System website, or through search engines.

Details

Ten NIOSH Analytical Methods Set-5.

PB287499

Publication Date	1978
Page Count	284
Abstract	Industrial hygiene sampling and analytical methods were developed and validated under a follow-up research effort to develop measurement methods which failed to validate under the joint NIOSH/OSHA Standards Completion Program. This is the fifth set of 10 methods in an effort to develop methods for 130 substances. Monitoring methods for the following substances are included: S199 Mercury; S321 Nitric Oxide; S319 Nitric Acid; S327 Formaldehyde; S288 Hydrogen Cyanide; S354 Copper (fume); S320 Nitrogen Dioxide; S334 Phosphorus (yellow); S371 Methoxyclor; S374 Methylcyclohexanol.
Keywords	Industrial hygiene Gas analysis Standards Tests Chemical analysis Methodology Monitors Oxygen organic compounds Air pollution Samples Experimental design Mercury(Metal) Nitrogen oxide(NO) DDT Hydrogen cyanide Nitric acid Formaldehyde Copper Nitrogen dioxide Phosphorus Occupational safety and health Air pollution detection Indoor air pollution Toxic substances Procedures Cyclohexanol/methyl Maximum permissible exposure level
Source Agency	National Institute for Occupational Safety and Health
NTIS Subject Category	68G - Environmental Health & Safety 99A - Analytical Chemistry 57U - Public Health & Industrial Medicine 68A - Air Pollution & Control
Corporate Authors	SRI International, Menlo Park, CA.; National Inst. for Occupational Safety and Health, Cincinnati, OH.
Supplemental Notes	See also Set 4, PB-281 038.
Document Type	Technical Report
NTIS Issue Number	197904
Contract Number	DHEW-210-76-0123

Ten NIOSH Analytical Methods Set-5.

Ten NIOSH Analytical Methods Set-5.
PB287499

Publication Date	1978
Page Count	284
Abstract	Industrial hygiene sampling and analytical methods were developed and validated under a follow-up research effort to develop measurement methods which failed to validate under the joint NIOSH/OSHA Standards Completion Program. This is the fifth set of 10 methods in an effort to develop methods for 130 substances. Monitoring methods for the following substances are included: S199 Mercury; S321 Nitric Oxide; S319 Nitric Acid; S327 Formaldehyde; S288 Hydrogen Cyanide; S354 Copper (fume); S320 Nitrogen Dioxide; S334 Phosphorus (yellow); S371 Methoxyclor; S374 Methylcyclohexanol.
Keywords	Industrial hygiene Gas analysis Standards Tests Chemical analysis Methodology Monitors Oxygen organic compounds Air pollution Samples Experimental design Mercury(Metal) Nitrogen oxide(NO) DDT Hydrogen cyanide Nitric acid Formaldehyde Copper Nitrogen dioxide Phosphorus Occupational safety and health Air pollution detection Indoor air pollution Toxic substances Procedures Cyclohexanol/methyl Maximum permissible exposure level
Source Agency	National Institute for Occupational Safety and Health
NTIS Subject Category	68G - Environmental Health & Safety 99A - Analytical Chemistry 57U - Public Health & Industrial Medicine 68A - Air Pollution & Control
Corporate Authors	SRI International, Menlo Park, CA.; National Inst. for Occupational Safety and Health, Cincinnati, OH.
Supplemental Notes	See also Set 4, PB-281 038.
Document Type	Technical Report
NTIS Issue Number	197904
Contract Number	DHEW-210-76-0123