National Technical Reports Library

The National Technical Information Service acquires, indexes, abstracts, and archives the largest collection of U.S. government-sponsored technical reports in existence. The NTRL offers online, free and open access to these authenticated government technical reports. Technical reports and documents in its repository may be available online for free either from the issuing federal agency, the U.S. Government Publishing Office’s Federal Digital System website, or through search engines.

Details

Ten NIOSH Analytical Methods Set-3.

PB275834

Publication Date	1977
Page Count	334
Abstract	Industrial hygiene sampling and analytical methods were developed and validated under a follow-up research effort to develop measurement methods which failed to validate under the joint NIOSH/OSHA Standards Completion Program. This is the third set of 10 methods in an effort to develop methods for 130 substances. Monitoring methods for the following substances are included: S350 n-Butyl Mercaptan; S203 Cobalt, Fume & Dust; S383 Tetraethyl Lead; S384 Tetramethyl Lead; S340 Carbon Monoxide; S215 Dinitrotoluene; S169 Acetic Acid; S316 Zinc Oxide; S308 Sulfur Dioxide; S381 Sodium Hydroxide.
Keywords	Industrial hygiene Gas analysis Standards Tests Chemical analysis Methodology Monitors Air pollution Samples Experimental Cobalt Carbon monoxide Sulfur organic compounds Acetic acid Sulfur dioxide Dinitrotoluene Zinc oxides Sodium hydroxide Occupational safety and health Air pollution detection Indoor air pollution Toxic substances Procedures Lead/tetraethyl Lead/tetramethyl Thiol/butyl Maximum permissible exposure level
Source Agency	National Institute for Occupational Safety and Health
NTIS Subject Category	68G - Environmental Health & Safety 99A - Analytical Chemistry 57U - Public Health & Industrial Medicine 68A - Air Pollution & Control
Corporate Authors	Stanford Research Inst., Menlo Park, Calif.; National Inst. for Occupational Safety and Health, Cincinnati, Ohio.
Supplemental Notes	See also Set 2, PB-271 464.
Document Type	Technical Report
NTIS Issue Number	197807
Contract Number	DHEW-210-76-0123

Ten NIOSH Analytical Methods Set-3.

Ten NIOSH Analytical Methods Set-3.
PB275834

Publication Date	1977
Page Count	334
Abstract	Industrial hygiene sampling and analytical methods were developed and validated under a follow-up research effort to develop measurement methods which failed to validate under the joint NIOSH/OSHA Standards Completion Program. This is the third set of 10 methods in an effort to develop methods for 130 substances. Monitoring methods for the following substances are included: S350 n-Butyl Mercaptan; S203 Cobalt, Fume & Dust; S383 Tetraethyl Lead; S384 Tetramethyl Lead; S340 Carbon Monoxide; S215 Dinitrotoluene; S169 Acetic Acid; S316 Zinc Oxide; S308 Sulfur Dioxide; S381 Sodium Hydroxide.
Keywords	Industrial hygiene Gas analysis Standards Tests Chemical analysis Methodology Monitors Air pollution Samples Experimental Cobalt Carbon monoxide Sulfur organic compounds Acetic acid Sulfur dioxide Dinitrotoluene Zinc oxides Sodium hydroxide Occupational safety and health Air pollution detection Indoor air pollution Toxic substances Procedures Lead/tetraethyl Lead/tetramethyl Thiol/butyl Maximum permissible exposure level
Source Agency	National Institute for Occupational Safety and Health
NTIS Subject Category	68G - Environmental Health & Safety 99A - Analytical Chemistry 57U - Public Health & Industrial Medicine 68A - Air Pollution & Control
Corporate Authors	Stanford Research Inst., Menlo Park, Calif.; National Inst. for Occupational Safety and Health, Cincinnati, Ohio.
Supplemental Notes	See also Set 2, PB-271 464.
Document Type	Technical Report
NTIS Issue Number	197807
Contract Number	DHEW-210-76-0123