National Technical Reports Library

The National Technical Information Service acquires, indexes, abstracts, and archives the largest collection of U.S. government-sponsored technical reports in existence. The NTRL offers online, free and open access to these authenticated government technical reports. Technical reports and documents in its repository may be available online for free either from the issuing federal agency, the U.S. Government Publishing Office’s Federal Digital System website, or through search engines.

Details

Copper Wire Tables.

NBSHB100

Publication Date	1966
Page Count	52
Abstract	This Handbook is a revision of the Copper Wire Tables previously published as NBS Circular 31. It reflects changes in the nominal diameters of gages 45 and smaller and extends the tables to 56 gage. The changed diameters and extended range were established in 1961 by the Committee on Wires for Electrical Conductors of the American Society for Testing and Materials and were published as ASTM Standard B258-61. They have also been approved as American Standard C7.36-1961 by the American Standards Association. To reduce internal inconsistencies, tables 5 through 14 were completely recomputed by the ASTM Committee on Wires for Electrical Conductors. The first edition of Circular 31 was published in 1912 at the request of the American Institute of Electrical Engineers. Subsequent editions appeared in 1914 and 1956.
Keywords	Copper Electric wire Handbooks Standards Tables Density Resistance(Electrical) Wire Electrical conductance Thickness Temperature
Source Agency	National Institute of Standards and Technology
NTIS Subject Category	49G - Resistive, Capacitive, & Inductive Components
Corporate Authors	National Bureau of Standards, Washington, D. C. Inst. of Applied Technology.
Supplemental Notes	Supersedes NBS-Circular-31.
Document Type	Technical Report
NTIS Issue Number	196610

Copper Wire Tables.

Copper Wire Tables.
NBSHB100

Publication Date	1966
Page Count	52
Abstract	This Handbook is a revision of the Copper Wire Tables previously published as NBS Circular 31. It reflects changes in the nominal diameters of gages 45 and smaller and extends the tables to 56 gage. The changed diameters and extended range were established in 1961 by the Committee on Wires for Electrical Conductors of the American Society for Testing and Materials and were published as ASTM Standard B258-61. They have also been approved as American Standard C7.36-1961 by the American Standards Association. To reduce internal inconsistencies, tables 5 through 14 were completely recomputed by the ASTM Committee on Wires for Electrical Conductors. The first edition of Circular 31 was published in 1912 at the request of the American Institute of Electrical Engineers. Subsequent editions appeared in 1914 and 1956.
Keywords	Copper Electric wire Handbooks Standards Tables Density Resistance(Electrical) Wire Electrical conductance Thickness Temperature
Source Agency	National Institute of Standards and Technology
NTIS Subject Category	49G - Resistive, Capacitive, & Inductive Components
Corporate Authors	National Bureau of Standards, Washington, D. C. Inst. of Applied Technology.
Supplemental Notes	Supersedes NBS-Circular-31.
Document Type	Technical Report
NTIS Issue Number	196610