National Technical Reports Library

The National Technical Information Service acquires, indexes, abstracts, and archives the largest collection of U.S. government-sponsored technical reports in existence. The NTRL offers online, free and open access to these authenticated government technical reports. Technical reports and documents in its repository may be available online for free either from the issuing federal agency, the U.S. Government Publishing Office’s Federal Digital System website, or through search engines.

Details

VDI 2230: Systematic Calculation of High Duty Bolted Joints.

DE84003447

Publication Date	1984
Page Count	155
Abstract	The guideline VDI 2230 deals with bolted joints which are to bear static or alternating working loads and which are to be created using high-strength bolts. The guideline should be used above all for joints the failure of which can cause serious damage. The specifications in this guideline are valid for steel bolts within the temperature range of -40 exp 0 C to 300 exp 0 C in which neither embrittlement due to cold nor creep stress of the bolt steels is expected. Above 120 exp 0 C the adjusted material characteristics must be used for calculations. (ERA citation 09:005084)
Keywords	Bolted Joints Deformation Specifications Stresses ERDA/420100 Translations
Source Agency	TIC Translation
NTIS Subject Category	94 - Industrial & Mechanical Engineering 41F - Joining
Corporate Authors	Oak Ridge National Lab., TN.; Department of Energy, Washington, DC.; Verein Deutscher Ingenieure (VDI), Duesseldorf (Germany, F.R.).
Supplemental Notes	Translation source information not available .
Document Type	Technical Report
NTIS Issue Number	198409
Contract Number	W-7405-ENG-26

VDI 2230: Systematic Calculation of High Duty Bolted Joints.

VDI 2230: Systematic Calculation of High Duty Bolted Joints.
DE84003447

Publication Date	1984
Page Count	155
Abstract	The guideline VDI 2230 deals with bolted joints which are to bear static or alternating working loads and which are to be created using high-strength bolts. The guideline should be used above all for joints the failure of which can cause serious damage. The specifications in this guideline are valid for steel bolts within the temperature range of -40 exp 0 C to 300 exp 0 C in which neither embrittlement due to cold nor creep stress of the bolt steels is expected. Above 120 exp 0 C the adjusted material characteristics must be used for calculations. (ERA citation 09:005084)
Keywords	Bolted Joints Deformation Specifications Stresses ERDA/420100 Translations
Source Agency	TIC Translation
NTIS Subject Category	94 - Industrial & Mechanical Engineering 41F - Joining
Corporate Authors	Oak Ridge National Lab., TN.; Department of Energy, Washington, DC.; Verein Deutscher Ingenieure (VDI), Duesseldorf (Germany, F.R.).
Supplemental Notes	Translation source information not available .
Document Type	Technical Report
NTIS Issue Number	198409
Contract Number	W-7405-ENG-26