National Technical Reports Library

The National Technical Information Service acquires, indexes, abstracts, and archives the largest collection of U.S. government-sponsored technical reports in existence. The NTRL offers online, free and open access to these authenticated government technical reports. Technical reports and documents in its repository may be available online for free either from the issuing federal agency, the U.S. Government Publishing Office’s Federal Digital System website, or through search engines.

Details

3D CFD Model of a Multi-Cell High Temperature Electrolysis Stack.

DE2008923509

Publication Date	2007
Personal Author	Hawkes, G. L.; O'Brien, J. E.; Stoots, C. M.
Page Count	8
Abstract	A three-dimensional computational fluid dynamics (CFD) electrochemical model has been created to model high-temperature electrolysis stack performance and steam electrolysis in the Idaho National Laboratory Integrated Lab Scale (ILS) experiment. The model is made of 60 planar cells stacked on top of each other operated as Solid Oxide Electrolysis Cells (SOEC). Details of the model geometry are specific to a stack that was fabricated by Ceramatec, Inc1. and tested at the Idaho National Laboratory. Inlet and outlet plenum flow and distribution are considered. Mass, momentum, energy, and species conservation and transport are provided via the core features of the commercial CFD code FLUENT2. A solid-oxide fuel cell (SOFC) model adds the electrochemical reactions and loss mechanisms and computation of the electric field throughout the cell. The FLUENT SOFC userdefined subroutine was modified for this work to allow for operation in the SOEC mode. Model results provide detailed profiles of temperature, Nernst potential, operating potential, activation overpotential, anode-side gas composition, cathode-side gas composition, current density and hydrogen production over a range of stack operating conditions. Variations in flow distribution, and species concentration are discussed.
Keywords	Electrolysis Fuel cells Hydrogen Computerized simulation Current density High temperature Distribution Electric fields End effects Engineers Fluid mechanics Anodes Geometry Computational fluid dynamics Steam Solid oxide fuel cells
Source Agency	Technical Information Center Oak Ridge Tennessee
Corporate Authors	Idaho National Engineering Lab., Idaho Falls.; Department of Energy, Washington, DC.
Supplemental Notes	Sponsored by Department of Energy, Washington, DC.
Document Type	Technical Report
NTIS Issue Number	200816
Contract Number	DE-AC07-99ID-13727

3D CFD Model of a Multi-Cell High Temperature Electrolysis Stack.

3D CFD Model of a Multi-Cell High Temperature Electrolysis Stack.
DE2008923509

Publication Date	2007
Personal Author	Hawkes, G. L.; O'Brien, J. E.; Stoots, C. M.
Page Count	8
Abstract	A three-dimensional computational fluid dynamics (CFD) electrochemical model has been created to model high-temperature electrolysis stack performance and steam electrolysis in the Idaho National Laboratory Integrated Lab Scale (ILS) experiment. The model is made of 60 planar cells stacked on top of each other operated as Solid Oxide Electrolysis Cells (SOEC). Details of the model geometry are specific to a stack that was fabricated by Ceramatec, Inc1. and tested at the Idaho National Laboratory. Inlet and outlet plenum flow and distribution are considered. Mass, momentum, energy, and species conservation and transport are provided via the core features of the commercial CFD code FLUENT2. A solid-oxide fuel cell (SOFC) model adds the electrochemical reactions and loss mechanisms and computation of the electric field throughout the cell. The FLUENT SOFC userdefined subroutine was modified for this work to allow for operation in the SOEC mode. Model results provide detailed profiles of temperature, Nernst potential, operating potential, activation overpotential, anode-side gas composition, cathode-side gas composition, current density and hydrogen production over a range of stack operating conditions. Variations in flow distribution, and species concentration are discussed.
Keywords	Electrolysis Fuel cells Hydrogen Computerized simulation Current density High temperature Distribution Electric fields End effects Engineers Fluid mechanics Anodes Geometry Computational fluid dynamics Steam Solid oxide fuel cells
Source Agency	Technical Information Center Oak Ridge Tennessee
Corporate Authors	Idaho National Engineering Lab., Idaho Falls.; Department of Energy, Washington, DC.
Supplemental Notes	Sponsored by Department of Energy, Washington, DC.
Document Type	Technical Report
NTIS Issue Number	200816
Contract Number	DE-AC07-99ID-13727