National Technical Reports Library

The National Technical Information Service acquires, indexes, abstracts, and archives the largest collection of U.S. government-sponsored technical reports in existence. The NTRL offers online, free and open access to these authenticated government technical reports. Technical reports and documents in its repository may be available online for free either from the issuing federal agency, the U.S. Government Publishing Office’s Federal Digital System website, or through search engines.

Details

OLEDs For General Lighting.

DE2005836831

Publication Date	2005
Page Count	62
Abstract	The goal of this program was to reduce the long term technical risks that were keeping the lighting industry from embracing and developing organic light-emitting diode (OLED) technology for general illumination. The specific goal was to develop OLEDs for lighting to the point where it was possible to demonstrate a large area white light panel with brightness and light quality comparable to a fluorescent source and with an efficacy comparable to that of an incandescent source. It was recognized that achieving this would require significant advances in three areas: (a) the improvement of white light quality for illumination, (b) the improvement of OLED energy efficiency at high brightness, and (c) the development of cost-effective large area fabrication techniques.
Keywords	Light emitting diodes Lights(Illumination) Lighting Energy efficiency Fabrication Performance Cost effectiveness Brightness Organic light emitting diodes(OLEDs)
Source Agency	Technical Information Center Oak Ridge Tennessee
Corporate Authors	Department of Energy, Washington, DC.
Document Type	Technical Report
NTIS Issue Number	200601

OLEDs For General Lighting.

OLEDs For General Lighting.
DE2005836831

Publication Date	2005
Page Count	62
Abstract	The goal of this program was to reduce the long term technical risks that were keeping the lighting industry from embracing and developing organic light-emitting diode (OLED) technology for general illumination. The specific goal was to develop OLEDs for lighting to the point where it was possible to demonstrate a large area white light panel with brightness and light quality comparable to a fluorescent source and with an efficacy comparable to that of an incandescent source. It was recognized that achieving this would require significant advances in three areas: (a) the improvement of white light quality for illumination, (b) the improvement of OLED energy efficiency at high brightness, and (c) the development of cost-effective large area fabrication techniques.
Keywords	Light emitting diodes Lights(Illumination) Lighting Energy efficiency Fabrication Performance Cost effectiveness Brightness Organic light emitting diodes(OLEDs)
Source Agency	Technical Information Center Oak Ridge Tennessee
Corporate Authors	Department of Energy, Washington, DC.
Document Type	Technical Report
NTIS Issue Number	200601