National Technical Reports Library

The National Technical Information Service acquires, indexes, abstracts, and archives the largest collection of U.S. government-sponsored technical reports in existence. The NTRL offers online, free and open access to these authenticated government technical reports. Technical reports and documents in its repository may be available online for free either from the issuing federal agency, the U.S. Government Publishing Office’s Federal Digital System website, or through search engines.

Details

Development and Manufacture of Cost Effective Composite Drill Pipe. Annual Technical Progress Report, 2001.

DE2004831119

Publication Date	2001
Page Count	24
Abstract	This technical report presents the engineering research and data accomplishments that have transpired to date in support of the development of Cost Effective Composite Drill Pipe (CDP). The report discusses and illustrates all progress in the first two years of this NETL/DOE supported program. The following have been accomplished and are reported in detail herein: (1) Specifications for both 5 5/16 inch and 3 3/8 inch composite drill pipe have been finalized. (2) All basic laboratory testing has been completed and has provide sufficient data for the selection of materials for the composite tubing, adhesives, and abrasion coatings. (3) Successful demonstration of composite/metal joint interfacial connection. (4) Upgrade of facilities to provide a functional pilot plant manufacturing facility. (5) Arrangements to have the 3 3/8 inch CDP used in a drilling operation early in C.Y. 2002. (6) Arrangements to have the 5 5/16 inch CDP marketed and produced by a major drill pipe manufacturer.
Keywords	Drill pipes Composite materials Manufacturing Specifications Drilling equipment Offshore drilling Pipes(Tubes) Performance testing Tension tests Carbon fiber reinforced plastics
Source Agency	Technical Information Center Oak Ridge Tennessee
Corporate Authors	Advanced Composite Products and Technology (ACPT), Inc., Huntington Beach, CA.; Department of Energy, Washington, DC.
Supplemental Notes	Sponsored by Department of Energy, Washington, DC.
Document Type	Technical Report
Title Note	Rept for 30 Sep 2000-29 Sep 2001.
NTIS Issue Number	200514

Development and Manufacture of Cost Effective Composite Drill Pipe. Annual Technical Progress Report, 2001.

Development and Manufacture of Cost Effective Composite Drill Pipe. Annual Technical Progress Report, 2001.
DE2004831119

Publication Date	2001
Page Count	24
Abstract	This technical report presents the engineering research and data accomplishments that have transpired to date in support of the development of Cost Effective Composite Drill Pipe (CDP). The report discusses and illustrates all progress in the first two years of this NETL/DOE supported program. The following have been accomplished and are reported in detail herein: (1) Specifications for both 5 5/16 inch and 3 3/8 inch composite drill pipe have been finalized. (2) All basic laboratory testing has been completed and has provide sufficient data for the selection of materials for the composite tubing, adhesives, and abrasion coatings. (3) Successful demonstration of composite/metal joint interfacial connection. (4) Upgrade of facilities to provide a functional pilot plant manufacturing facility. (5) Arrangements to have the 3 3/8 inch CDP used in a drilling operation early in C.Y. 2002. (6) Arrangements to have the 5 5/16 inch CDP marketed and produced by a major drill pipe manufacturer.
Keywords	Drill pipes Composite materials Manufacturing Specifications Drilling equipment Offshore drilling Pipes(Tubes) Performance testing Tension tests Carbon fiber reinforced plastics
Source Agency	Technical Information Center Oak Ridge Tennessee
Corporate Authors	Advanced Composite Products and Technology (ACPT), Inc., Huntington Beach, CA.; Department of Energy, Washington, DC.
Supplemental Notes	Sponsored by Department of Energy, Washington, DC.
Document Type	Technical Report
Title Note	Rept for 30 Sep 2000-29 Sep 2001.
NTIS Issue Number	200514