Publication Date |
2002 |
Personal Author |
Weber, T. P.; Ma, B.; Balachandran, U.; McNallan, M. |
Page Count |
12 |
Abstract |
The development of high critical-temperature thin-film superconductors and coated conducting wires is important for electric power applications. To achieve high transport current density, template films are necessary for the successful deposition of biaxially aligned YBa2Cu3O7-x (YBCO) on flexible metal substrates. We grew biaxially aligned magnesium oxide (MgO) template films by ion-beam-assisted deposition with electron-beam evaporation. MgO films of approximately 100 angstroms thickness were deposited on Si3N4-coated Si substrates at a deposition rate of approximately 1.5 angstroms/sec with an ion flux of approximately 110 microA/cm2 bombarding the substrate at a 45 degree angle. To study crystalline structure by X-ray diffraction, we deposited an additional layer of MgO. Good in- and out-of-plane alignment was observed, with (111) -scan full-width half-maximum (FWHM) of 6.2 degrees and (002) micro-scan FWHM of 2.2 degrees. |
Keywords |
|
Source Agency |
|
Corporate Authors |
Argonne National Lab., IL. Energy Technology Div.; Department of Energy, Washington, DC.; Illinois Univ. at Urbana-Champaign. Dept. of Materials Science and |
Supplemental Notes |
Prepared in cooperation with Illinois Univ. at Urbana-Champaign. Dept. of Materials Science and Engineering. Sponsored by Department of Energy, Washington, DC. |
Document Type |
Technical Report |
NTIS Issue Number |
200222 |