National Technical Reports Library

The National Technical Information Service acquires, indexes, abstracts, and archives the largest collection of U.S. government-sponsored technical reports in existence. The NTRL offers online, free and open access to these authenticated government technical reports. Technical reports and documents in its repository may be available online for free either from the issuing federal agency, the U.S. Government Publishing Office’s Federal Digital System website, or through search engines.

Details

DE2001780129

Publication Date	2001
Personal Author	Daniel, W. E.; Eibling, R. E.
Page Count	52
Abstract	One alternative ITP is looking into is the use of non-elutable CST resin to remove Cs-137 from the supernate of SRS High Level Waste. ITP requested ITS to investigate if the settling behavior of the CST resin differs from the current DWPF glass former (frit) used in the melter feed preparation. The CST settling behavior is important in that it could impact the slurry and thus sampling homogeneity, which in turn affects the Waste Acceptance criteria and mixing requirements. The testing requested by this TAR was scoping in nature.
Keywords	Sludges Radioactive waste storage Rheology curves Rig setup Mixer speed check Particle size distribution Time settling data Settling behavior Supernatant Defense Waste Processing Facility(DWPF) Weight percent solids
Source Agency	Technical Information Center Oak Ridge Tennessee
Corporate Authors	Westinghouse Savannah River Co., Aiken, SC.; Department of Energy, Washington, DC.
Supplemental Notes	Sponsored by Department of Energy, Washington, DC.
Document Type	Technical Report
NTIS Issue Number	200122
Contract Number	DE-AC09-96SR18500

Settling Rate Study for Melter Feed of Tank 42 Sludge and CST in the Defense Waste Processing Facility (DWPF).

Settling Rate Study for Melter Feed of Tank 42 Sludge and CST in the Defense Waste Processing Facility (DWPF).
DE2001780129

Publication Date	2001
Personal Author	Daniel, W. E.; Eibling, R. E.
Page Count	52
Abstract	One alternative ITP is looking into is the use of non-elutable CST resin to remove Cs-137 from the supernate of SRS High Level Waste. ITP requested ITS to investigate if the settling behavior of the CST resin differs from the current DWPF glass former (frit) used in the melter feed preparation. The CST settling behavior is important in that it could impact the slurry and thus sampling homogeneity, which in turn affects the Waste Acceptance criteria and mixing requirements. The testing requested by this TAR was scoping in nature.
Keywords	Sludges Radioactive waste storage Rheology curves Rig setup Mixer speed check Particle size distribution Time settling data Settling behavior Supernatant Defense Waste Processing Facility(DWPF) Weight percent solids
Source Agency	Technical Information Center Oak Ridge Tennessee
Corporate Authors	Westinghouse Savannah River Co., Aiken, SC.; Department of Energy, Washington, DC.
Supplemental Notes	Sponsored by Department of Energy, Washington, DC.
Document Type	Technical Report
NTIS Issue Number	200122
Contract Number	DE-AC09-96SR18500