National Technical Reports Library

The National Technical Information Service acquires, indexes, abstracts, and archives the largest collection of U.S. government-sponsored technical reports in existence. The NTRL offers online, free and open access to these authenticated government technical reports. Technical reports and documents in its repository may be available online for free either from the issuing federal agency, the U.S. Government Publishing Office’s Federal Digital System website, or through search engines.

Details

Space and Missile Systems Center Standard: Parts, Materials, and Processes Control Program for Space Vehicles.

ADA619373

Publication Date	2013
Page Count	116
Abstract	This document establishes the requirements (including those cited in the Appendices herein) for the preparation, implementation, and operation of a Parts, Materials, and Processes (PMP) control program for use during the design, development, manufacture, assembly, integration and test of space systems. It is intended to be used in conjunction with Aerospace TOR-2006(8583)-5236, Technical Requirements for Electronic Parts, Materials, and Processes Used in Space Vehicles. The implementation of these requirements is intended to: A. Assure integrated management of the selection, application, procurement, verification, control, and standardization of parts, materials, and processes (PMP). B. Improve the reliability of program PMP. C. Improve procurement and test of small quantities of piece parts and materials that meet system requirements. D. Reduce PMP failures at all levels of manufacturing, integration, assembly, and test. E. Reduce program life cycle costs and enhance product performance during its life cycle. This document is intended for use in acquisition of all satellites and experimental missions (as applicable when referenced in the contract) intended for spaceflight where repair is not possible.
Keywords	Spacecraft components Air force procurement Planning programming budgeting Space technology Standards Tor(technical operating report) Sqb(space quality baseline)
Source Agency	Non Paid ADAS
NTIS Subject Category	70B - Management Practice 74E - Logistics, Military Facilities, & Supplies 84G - Unmanned Spacecraft
Corporate Authors	Space and Missile Systems Center, Los Angeles AFB, CA.
Supplemental Notes	Supersedes SMC-S-009 (2009). This revised SMC standard comprises the text of The Aerospace Corporation report number TOR-2006(8583)-2335 REV B, dated March 6, 2013, entitled Parts, Materials, and Processes Control Program for Space Vehicles.
Document Type	Technical Report
NTIS Issue Number	201525

Space and Missile Systems Center Standard: Parts, Materials, and Processes Control Program for Space Vehicles.

Space and Missile Systems Center Standard: Parts, Materials, and Processes Control Program for Space Vehicles.
ADA619373

Publication Date	2013
Page Count	116
Abstract	This document establishes the requirements (including those cited in the Appendices herein) for the preparation, implementation, and operation of a Parts, Materials, and Processes (PMP) control program for use during the design, development, manufacture, assembly, integration and test of space systems. It is intended to be used in conjunction with Aerospace TOR-2006(8583)-5236, Technical Requirements for Electronic Parts, Materials, and Processes Used in Space Vehicles. The implementation of these requirements is intended to: A. Assure integrated management of the selection, application, procurement, verification, control, and standardization of parts, materials, and processes (PMP). B. Improve the reliability of program PMP. C. Improve procurement and test of small quantities of piece parts and materials that meet system requirements. D. Reduce PMP failures at all levels of manufacturing, integration, assembly, and test. E. Reduce program life cycle costs and enhance product performance during its life cycle. This document is intended for use in acquisition of all satellites and experimental missions (as applicable when referenced in the contract) intended for spaceflight where repair is not possible.
Keywords	Spacecraft components Air force procurement Planning programming budgeting Space technology Standards Tor(technical operating report) Sqb(space quality baseline)
Source Agency	Non Paid ADAS
NTIS Subject Category	70B - Management Practice 74E - Logistics, Military Facilities, & Supplies 84G - Unmanned Spacecraft
Corporate Authors	Space and Missile Systems Center, Los Angeles AFB, CA.
Supplemental Notes	Supersedes SMC-S-009 (2009). This revised SMC standard comprises the text of The Aerospace Corporation report number TOR-2006(8583)-2335 REV B, dated March 6, 2013, entitled Parts, Materials, and Processes Control Program for Space Vehicles.
Document Type	Technical Report
NTIS Issue Number	201525